Micro-Measurements’ System 7100 StrainSmart Data Acquisition System Offers Greater Flexibility, High-Accuracy and Fast Set-up

Micro-Measurements’ System 7100 StrainSmart Data Acquisition System Offers Greater Flexibility, High-Accuracy and Fast Set-up

Micro-Measurements (United States) - Features up to 128 channels; Supports Strain Gage, Strain-Gage-Based Transducer, Thermocouple, LVDTs and High-Level Voltage Sensor Inputs.

The Micro-Measurements® brand of Vishay Precision Group, Inc. announced that it has introduced a new high performance data acquisition system featuring a scanner with up to 128 software-configurable input channels.  The System 7100 StrainSmart® Data Acquisition System offers high-accuracy, greater flexibility and ease-of-use for a broad range of applications including design verification of engineered products, component failure analysis, test & measurement, as well as consumer product development.

Each of the System 7100’s sensor channel employs a 24-bit analog-to-digital converter and supports synchronized scan rates of up to 2000 updates per second for simultaneous reading of all sensor inputs. The System 7100 can accept signals from strain gages (strain gauges) or strain-gage-based transducers, thermocouples, or high-level voltage sensors. Strain gage channels support full-, half-, or quarter-bridge configurations, and offer built-in precision bridge completion for 120 Ω, 350 Ω, and 1000 Ω.

The System 7100 offers easy setup and can be configured with a virtually unlimited number of sensors using multiple scanners.  Its built-in self-calibration capability with removable reference (VCAL module) enables calibration to be performed anywhere without the need to return the system to the factory. In addition, the System 7100 provides the following features for lower cost-of-ownership:

  • All channels are fully synchronous (channel to channel and scanner to scanner).
  • Ethernet interface enables maximum installation flexibility.
  • RJ45 connectors and standard TC connectors for thermocouples allows for fast connection of sensors.
  • StrainSmart 7100 software offers fast setup – from installation to fully-calibrated data in minutes.
  • Barcode scanning of MM strain gage engineering data eliminates user input errors.
  • PCBA analysis module (to IPC/JEDEC 9704A) provides for fast pass/fail and strain rate reporting.

The System 7100 hardware incorporates all the features required for precision strain measurement in a high channel density enclosure. Strain gages, strain gage based transducers, thermocouples, LVDTs, and other sensors with high level voltage outputs can be intermixed in groups of eight (8) by choosing the appropriate sensor card for up to 128 channels in a 5U height, 19-inch rack mountable scanner (7100-128-SM). A 32-channel scanner is also available (7100-32-SM). The Ethernet interface with DHCP addressing allows for flexible positioning of scanners with easy synchronization of multiple scanners using a single sync cable.


About Micro-Measurements:

Micro-Measurements, a Vishay Precision Group, Inc. (VPG) brand, is dedicated to the development, manufacture, and marketing of resistive-foil sensors for high-precision strain measurement. Micro-Measurements offers a full complement of strain gages, PhotoStress® equipment and coatings, data acquisition systems, and supplies necessary to obtain accurate, reliable stress data. Our products are used throughout the industrialized world — both in the practice of stress measurements analysis and as the sensing elements in a wide variety of transducers for measuring physical variables (weight, force, torque, pressure, etc.).

About VPG:

Vishay Precision Group, Inc. is an internationally recognized designer, manufacturer and marketer of: components based on its resistive foil technology; sensors; and sensor-based measurement systems specializing in the growing markets of stress, force, weight, pressure, and current measurements. VPG is a market leader of foil technology products, providing ongoing technology innovations in precision foil resistors and foil strain gages, which are the foundation of the company’s force sensors products and its weighing and control systems. The product portfolio consists of a variety of well-established brand names recognized for precision and quality in the marketplace.

Micro-Measurements, StrainSmart and PhotoStress are registered trademarks of VPG.

For more information about this article from Micro-Measurements click here.

Source link

Other articles from Micro-Measurements.

Interesting Links:
List all your Scales and other Weighing Products (new and used) on our Marketplace !

Visit AutomationInside.com for Automation and Technology Related News!

Are you interested to include your Link here, visible on all WeighingReview.com articles and marketplace product pages? Contact us

© Micro-Measurements / International Weighing Review

Share this Article!

Interested? Submit your enquiry using the form below:

Only available for registered users. Sign In to your account or register here.

New High Speed Barcode Reader for Checkweighers - now available from AWM Limited

Ishida Weigher gently supports Confiserie Bosch’s growth