SysTec Systemtechnik und Industrieautomation GmbH (Germany) - Hybrid seminar in English: 24th, November 2022 (optionally participate via web or in presence).
Providing the capability to competently plan, put into operation & service checkweighers.
Service technicians from our service and sales partners on request to configure and commission checkweighers.
Providing the capability to competently plan, put into operation and service checkweighers with ITx000E CHECK and ITx000E EasyCheck weighing terminals.
Type of event:
Hybrid seminar: You have the choice whether you want to participate online via web or in presence on site. Once you have submitted the booking request (yellow button below), a SysTec representative will proactively contact you to clarify in which form you will participate.
The booking request is set to "web seminar" by default, you can also submit this form, if you want to choose presence. The final arrangement will be made with one of our staff members, who will contact you as soon as you have sent the request vua web.
The costs for the web variant and the attendance seminar are listed below.
Web seminar: 1 day, 3 x 1.5 h, with adequate breaks
Charges: 200 EUR per participant
Order No. WEBSEM-CHK-E (English)
Attendance seminar on request: 1 day, 2 x 3.5 h, with adequate breaks (including practical exercises on provided equipment)
Charges: 200 Euro per participant
Location: Bergheim near Cologne, Germany, SysTec headquarter
Corona protection measures for on site participation:
The current situation is very dynamic. Official regulations can change at short notice. Therefore, our trainer team will inform the participants shortly ahead of the event regarding the rules.
Recommended conditions of participation:
General understanding of weighing technology and uccessful completion of SysTec Service Seminar
- Introduction to checkweighers
- General principles
- Overview on Regulations For Prepackaged Goods
- Load receptors
- Operation with input and output light barriers
- Rejection of out-of-tolerance products (pusher)
- Connection of analog load cells
- Connection of required external components (light barriers, pusher)
- Configuration and calibration
- Calibration of scale
- Setting of filters
- Optimization of CHECK E filter settings by means of PC CHECK software
- 1-day seminar
- Thursday, 24th November 2022 seminar in English
- Time: 09:00 - 14:30 CET