General Measure Technology Co. Ltd. (China) - Press Release: In general, analog output will be calibrated and tested at the factory. When abnormal analog output is detected, we can calibrate to correct the analog output.
So, in this video, we illustrated how to calibrate and test the analog output of weighing indicator, taking GMT-P1 as an example.
The equipment we need to prepare:
- GMT-P1 COM Version
- Simulator and wires
There are 3 steps for calibrating and testing the analog output:
- First, set the parameter of analog output
- Second, calibrate the analog output
- Third, verify the calibration
Please pay attention four points of analog output should be all calibrated. Now, you can check the video for detailed method for analog output calibration and testing.